To manually recline an electric recliner, locate the release lever or button and push it while leaning back into the chair. It may require a bit of force to fully recline the chair.
If you’re someone who loves to curl up in an electric recliner and watch your favourite tv shows or read books often, you may have experienced a situation where the electric recliner stopped working. Such issues may arise due to a power outage, a technical error, or any other reason.
If you find yourself in this situation, don’t worry! You can still manually recline your electric recliner and enjoy your leisure time. In this article, we’ll discuss how to manually recline an electric recliner with some easy steps.
Credit: www.feneticwellbeing.com
Reasons Why You Might Need To Manually Recline An Electric Recliner Chair
Electric recliner chairs are fantastic products that provide immense comfort. But what happens when the power goes out, and you’re left with a recliner that can’t adjust itself? That’s where manually reclining the chair comes in handy. Here are some situations where you might need to do so:
Loss Of Power
- Power outage: If you’re in a region prone to power outages, you might find yourself unable to adjust your chair. Manually reclining it is the only option.
- Dead battery: Most electric recliner chairs come with rechargeable batteries. If the battery runs out while you’re sitting on the chair, you’ll need to manually recline it.
- Loose connection: If there’s a loose connection in the wiring of your recliner, it can interrupt power supply to the motor, making it impossible to use the remote control. Manually reclining the chair is a solution.
Electrical Malfunction
- Faulty motor: A faulty motor is a common problem with electric recliner chairs. If the motor is broken, you won’t be able to adjust the chair using the remote control. Manually reclining the chair is your only option.
- Broken wiring: Sometimes, the wiring of an electric recliner chair can break, causing electrical malfunctions. In these situations, manually reclining the chair can be a temporary solution until you get it fixed.
- Damaged remote control: A damaged remote control can also make it impossible to control an electric recliner chair. You can manually recline the chair until you replace the remote.
With these reasons, you’re now better equipped to understand why you might need to manually recline an electric recliner chair. Remember, always refer to your user manual for exact instructions on how to manually recline your specific model of the chair.
Tools Required To Manually Recline An Electric Recliner Chair
How To Manually Recline An Electric Recliner: Simple Steps
Electric recliners are truly amazing and make life much more comfortable. However, what happens when the power goes out, and you cannot recline the chair? Fear not! You can still enjoy the comfortable reclining position with some manual work. This blog post will cover the necessary and optional tools required to manually recline an electric recliner chair in simple steps.
Necessary Tools
To manually recline an electric recliner, you need a few essential tools that you’ll most likely already have at home. These tools include:
- A screwdriver: You may need to unscrew some parts to successfully work on the mechanism of the recliner.
- A pair of pliers: You’ll use the pliers to grip and twist some parts after removing them with the screwdriver.
- A flashlight: You’ll need this to see into the inner workings of the recliner since there could be hard-to-reach places inside the chair.
Optional Tools
These tools aren’t a must-have but might make the process smoother or easier for you. You can consider having them to make things go smoothly, especially if you plan on manually reclining your chair frequently.
- Gloves: These will protect your hands from sharp edges and moving parts in the recliner.
- Lubricants: Applying lubricants to moving parts can make them work better, especially if the chair hasn’t moved in a while.
- Wrenches: Wrenches can help you tighten and loosen nuts and bolts in the recliner mechanism.
With these essential and optional tools, you can manually recline an electric recliner chair without any complications. Remember always to read the user manual before starting. You don’t want to damage your chair or get harmed while working on it.
Step-By-Step Guide On How To Manually Recline An Electric Recliner Chair
An electric recliner chair can provide comfort and relaxation to your body, but what if the power goes out or the electric motor stops working? In that case, you need to know how to manually recline your electric recliner chair.
Here is a step-by-step guide on how to do it efficiently and safely.
Required Tools
Before starting the process, you will need to gather a few tools that will help you in the process. Here are the tools that you might require:
- A pair of pliers
- A flat-head screwdriver
- A power drill
- A socket wrench
Steps To Manually Recline An Electric Recliner Chair
Follow these simple steps to manually recline your electric recliner chair:
- Locate the bolts: You need to locate the bolts that hold the recliner motor to the frame. Use the flat-head screwdriver to remove any plastic covers on the motor housing.
- Disconnect the motor: Use the pliers to disconnect the motor from the power supply by unplugging the cords that connect it to the wall outlet.
- Find the recliner bar: The recliner bar is usually located on the inside of the frame under the seat. Once you have found it, take your pliers.
- Remove the bolts: Use your socket wrench to remove the bolts that are holding the motor to the frame. Be careful while doing this process.
- Adjust the recliner bar manually: Once you have removed the bolts, use your pliers to take the recliner bar and manually adjust it to the required reclining position.
- Secure the recliner bar: Once you have adjusted the recliner bar to the desired position, use your socket wrench to secure it tightly to the frame by replacing the bolts.
- Test: Make sure to test the recliner bar before using it by gently pushing the backrest to check if it locks in place.
Precautions To Take While Manually Reclining An Electric Recliner Chair:
Here are a few precautions that you should take while manually reclining your electric recliner chair:
- While removing the bolts, be careful not to damage the motor or the frame.
- Before adjusting the recliner bar, make sure that the chair is on a level surface to avoid any unwanted movement.
- Always make sure to secure the recliner bar tightly to the frame to prevent any risk of injury or unwanted movement.
- While testing the chair, do not apply too much force to the backrest as it may cause damage to the chair.
Now that you know how to manually recline your electric recliner chair, you can enjoy your comfort even during a power outage or motor failure. Just follow the given steps cautiously, and you’re good to go.
Precautions To Take When Manually Reclining An Electric Recliner Chair
An electric recliner chair is a comfortable and convenient piece of furniture that we all love to use. But sometimes, these chairs may not work correctly, and you may need to recline them manually. While doing so, you need to take some precautions to avoid any harm to you or the chair.
In this section, we’ll discuss some essential safety measures you should follow while manually reclining an electric recliner chair.
Safety Precautions
Before starting, turn off the power supply of the chair. This will prevent any electrical hazards, like electric shocks.
If your electric recliner chair has a battery backup option, make sure to disconnect it before reclining the chair manually.
Make sure you read the instruction manual of the chair before attempting to recline it manually. The manual will give you a better understanding of the mechanism of the chair, which can help you avoid any breakage or malfunctioning of the chair.
Ensure that the reclining mechanism is not obstructed by any object. Moving any obstructions will help you recline the chair without any issues.
Make sure the area around the chair is clear of any objects or people. This will allow you to move around the chair conveniently.
To avoid damaging the chair, make sure you do not apply excessive force while reclining it manually.
If you’re unsure about how to manually recline the chair or if you are not physically able to do so, it’s best to seek professional help.
Avoiding Damage
While manually reclining an electric recliner chair, it’s essential to take some precautions to avoid damaging the chair. Here are some tips to keep in mind:
Make sure you don’t apply too much force while reclining the chair. This can cause the internal mechanism to break, leading to expensive repairs.
Don’t push or pull the recliner’s footrest without releasing the seat back. Doing so can damage the locking mechanism of the chair, making it unusable.
Be careful while reclining the chair. Applying too much force can bend or break the frame or hinges, causing permanent damage to the chair.
Manually reclining an electric recliner chair is a simple task if you follow the necessary precautions. Always prioritize safety and be careful while manually reclining the chair. Following these precautions will ensure that you can recline the chair manually with ease while avoiding any harm to you and the chair.
Frequently Asked Questions On How To Manually Recline An Electric Recliner
How Do You Manually Recline An Electric Recliner?
To manually recline an electric recliner, you need to locate the release cord which is usually found at the bottom of your recliner. Pull the cord to release the footrest and lean back to recline it.
What If The Release Cord Is Stuck?
If the release cord is stuck, you can use a flathead screwdriver to gently pry it loose. Be careful not to damage the cord or the recliner’s mechanism.
Why Would Someone Manually Recline An Electric Recliner?
Manual reclining can be useful if your electric recliner suddenly stops working or if you prefer to control the recline angle yourself. It’s also a good way to save electricity.
Is It Safe To Manually Recline An Electric Recliner?
Yes, it is safe to manually recline an electric recliner. The reclining mechanism is designed to work both manually and electrically, so you won’t damage anything by doing it yourself.
How Can You Troubleshoot An Electric Recliner That Won’T Recline?
If your electric recliner won’t recline, first check if it is properly plugged in, then check the remote control batteries. If that doesn’t work, check for any obstructions or loose wiring. If all else fails, you might need to call a professional.
Conclusion
Manually reclining an electric recliner doesn’t have to be complicated or intimidating. With the simple steps outlined in this post, you can recline your chair safely and effortlessly. Remember to locate the manual release and handle, use both hands to gently push the chair into the desired position, and secure the chair once you’ve achieved the desired recline.
By following these steps and paying attention to any manufacturer instructions, you can customize your seating experience and enjoy the comfort of your electric recliner to the fullest. Regular maintenance and proper care can also help prolong the lifespan of your chair, so don’t forget to clean and inspect it regularly.
With patience, practice, and careful attention, manually reclining an electric recliner can become a simple and rewarding part of your daily routine.
